Tình trạng sẵn có: | |
---|---|
Số: | |
QT-02-L/G
QOTO
Gsm Based Solar Powered Irrigation Valve Controller for pomegranate tree plantation
Product Description
The solar powered irrigation valve system can be used in agricultural irrigation, like slope orchards, woodlands, nurseries, vegetable bases, tea plantations, greenhouse micro-spraying, fruit tree drip irrigation, farmland irrigation, greenhouse seedling raising, open-air vegetable fields, greenhouse irrigation, fungus moisturizing. And it also can be applied in urban greening project like lawn watering, overhead bridge flower planter, green belts in urban streets and districts, vertical greening.
Solar powered all-in-one system design make a wireless installation without electric cable and control cabinet. Multiple irrigation modes to satisfy plants growing: Single control, cycle control, timed program and polling irrigation. The valves have smart interaction with pumps and sensors, which can adjust water pressure according to environment elements and regulate pipe pressure at will.
Product Characteristics
1. Motorized valve
2. Partial aperture(programmable from 0~100% )
3. External flow meter pulse counting
4. Water pressure: 0~1000PSI
5. Available ball valve from DN32-DN65, butterfly valve from DN50-DN100
6. Cellular network connectivity(GSM, GPRS, CDMA, 2G / GSM, 3G, 4G / LTE, EDGE)
7. Port available for USB power supply and extra solar panel
8. Control the irrigation task remotely via the internet or via SMS messaging
Data sheet
product model | QT-02F-G |
battery | 18650 lithium battery(wide temperature), battery capacity: 2000mAh,four pcs |
solar panel | polysilicon 6V 5.5W |
botton connector port | solar power charging port can support 5V 1A USB charger(6.5V/2A max) |
flow meter | external flow meter |
max speed:10m/s | |
min speed:0.3m/s | |
working pressure:5kg/cm^2 | |
ball valve torque | 60 N.m |
Max power | communication:3.8W |
block:25W | |
low power mode | sleep current:<10uA |
non low power mode | stand-by current:NB<48mA,4G<65mA,lora<26mA |
wireless communication specification | 4G | LTE Cat-1 |
LTE-FDD: B1/B3/B5/B8 | ||
LTE-TDD: B34/38/39/40/41 | ||
HTTP MQTT TCP/IP | ||
NB | Cat-NB B3/B5/B8 | |
HTTP MQTT TCP/UDP |
Gsm Based Solar Powered Irrigation Valve Controller for pomegranate tree plantation
Product Description
The solar powered irrigation valve system can be used in agricultural irrigation, like slope orchards, woodlands, nurseries, vegetable bases, tea plantations, greenhouse micro-spraying, fruit tree drip irrigation, farmland irrigation, greenhouse seedling raising, open-air vegetable fields, greenhouse irrigation, fungus moisturizing. And it also can be applied in urban greening project like lawn watering, overhead bridge flower planter, green belts in urban streets and districts, vertical greening.
Solar powered all-in-one system design make a wireless installation without electric cable and control cabinet. Multiple irrigation modes to satisfy plants growing: Single control, cycle control, timed program and polling irrigation. The valves have smart interaction with pumps and sensors, which can adjust water pressure according to environment elements and regulate pipe pressure at will.
Product Characteristics
1. Motorized valve
2. Partial aperture(programmable from 0~100% )
3. External flow meter pulse counting
4. Water pressure: 0~1000PSI
5. Available ball valve from DN32-DN65, butterfly valve from DN50-DN100
6. Cellular network connectivity(GSM, GPRS, CDMA, 2G / GSM, 3G, 4G / LTE, EDGE)
7. Port available for USB power supply and extra solar panel
8. Control the irrigation task remotely via the internet or via SMS messaging
Data sheet
product model | QT-02F-G |
battery | 18650 lithium battery(wide temperature), battery capacity: 2000mAh,four pcs |
solar panel | polysilicon 6V 5.5W |
botton connector port | solar power charging port can support 5V 1A USB charger(6.5V/2A max) |
flow meter | external flow meter |
max speed:10m/s | |
min speed:0.3m/s | |
working pressure:5kg/cm^2 | |
ball valve torque | 60 N.m |
Max power | communication:3.8W |
block:25W | |
low power mode | sleep current:<10uA |
non low power mode | stand-by current:NB<48mA,4G<65mA,lora<26mA |
wireless communication specification | 4G | LTE Cat-1 |
LTE-FDD: B1/B3/B5/B8 | ||
LTE-TDD: B34/38/39/40/41 | ||
HTTP MQTT TCP/IP | ||
NB | Cat-NB B3/B5/B8 | |
HTTP MQTT TCP/UDP |